Hello,
I am having some trouble running 2 of my models. The Ponded Water Storage hits values of 263184 (after 11 time steps) or 688888 in the first time step. The forcings looks fine though. What could be the problem?
Thanks a lot in advance.
Ponded Water storage suddenly very high
-
- Posts: 21
- Joined: Wed Jan 18, 2017 9:59 am
Ponded Water storage suddenly very high
You do not have the required permissions to view the files attached to this post.
-
- Posts: 57
- Joined: Tue Jul 05, 2016 1:08 pm
Re: Ponded Water storage suddenly very high
This is likely a missing parameter in your model that Raven isn't properly checking for; it is best in cases like this to step through the troubleshooting approach outlined in the Raven Users' manual to identify your problematic process (basically commenting out processes in the :HydrologicProcesses list until you identify the culprit process). Once you identify the problematic process, check the documentation to see if you have all of the required parameters. If you cannot determine the solution, send me (James Craig) an e-mail with your faulty model and I will see if I can sleuth it out.